FreeOZ论坛

标题: IT紧缺职业类别统计MODL-2231-79 [打印本页]

作者: sasa6    时间: 22-11-2008 14:23
标题: IT紧缺职业类别统计MODL-2231-79
一共14个类别,统计一下看看?

紧缺职业的时间要求为指最近四年内最少有一年该职业的工作经验。

如果在进行职业评估时获得紧缺职业的提名,能加15分,紧缺并有澳洲offer的加20分。

http://www.immi.gov.au/skilled/general-skilled-migration/175/eligibility-offer.htm

Occupation in demand/job offerIf your nominated occupation is on the Migration Occupations in Demand List (MODL) either at the time your application is lodged or assessed and you have recent work experience related to that occupation, you can be awarded additional points.

The MODL has occupations from within the Skilled Occupation List (SOL) identified as being in demand in Australia. You will be eligible for a higher number of points if you also have a full time job offer from an employer in Australia.

You should be aware that occupations on the MODL change from time to time. More information is available on the MODL.

See: Is your occupation in demand?
Points awardedThe table below sets out the points available under this part of the points test.
OccupationPoints
If all the following apply:
  • your nominated occupation is on the MODL
  • you have been employed in your nominated skilled occupation, or a closely related skilled occupation for a period totalling at least one (1) year in the four (4) years immediately before you make your application
  • you have a job offer for full time employment in Australia in your nominated occupation from an organisation that has employed at least ten (10) people on a full time basis for the two (2) years immediately before you make your application.
20
If all the following apply:
  • your nominated occupation is in demand on the MODL
  • you have been employed in your nominated skilled occupation or a closely related skilled occupation for a period totalling at least one (1) year in the four (4) years immediately before you make your application.
15

Evidence to attach to your applicationTo receive extra points for a job offer, you must provide documentary evidence of your job offer. This evidence must:
For you to be awarded these points, documentary evidence as described above must be included with your application. The department will check the details of any job offer provided before points are awarded.

http://www.immi.gov.au/skilled/general-skilled-migration/skilled-occupations/occupations-in-demand.htm

Is your occupation in demand? On this page:


What is the Migration Occupations in Demand List (MODL)? The Migration Occupations in Demand List (MODL) lists those occupations and specialisations identified by the Department of Education, Employment and Workplace Relations (DEEWR) that are in short supply.
What occupations are currently MODL? The table below shows the current (as at 17 May 2008) occupations in demand for migration purposes.
MIGRATION OCCUPATIONS IN DEMAND (MODL)
Managers and Administrators ASCO code
Child Care Coordinator 1295-11
Engineering Manager1221-11
ProfessionalsASCO code
Accountant 2211-11
Anaesthetist 2312-11
Architect2121-11
Chemical Engineer 2129-17
Civil Engineer 2124-11
Computing Professional - specialising in CISSP * 2231-79
Computing Professional - specialising in C++/C#/C * 2231-79
Computing Professional - specialising in Data Warehousing2231-79
Computing Professional - specialising in Java * 2231-79
Computing Professional - specialising in J2EE * 2231-79
Computing Professional - Linux2231-79
Computing Professional - .Net technologies2231-79
Computing Professional - specialising in Network Security/Firewall/Internet Security * 2231-79
Computing Professional - specialising in Oracle * 2231-79
Computing Professional - specialising in PeopleSoft * 2231-79
Computing Professional - specialising in SAP * 2231-79
Computing Professional - specialising in SIEBEL *
(especially Siebel Analytic)
2231-79
Computing Professional - Solaris2231-79
Computing Professional - Unix2231-79
Dental Specialist 2381-13
Dentist 2381-11
Dermatologist 2312-13
Electrical Engineer 2125-11
Electronics Engineer2125-13
Emergency Medicine Specialist 2312-15
External Auditor 2212-11
General Medical Practitioner 2311-11
Hospital Pharmacist 2382-11
Mechanical Engineer 2126-11
Medical Diagnostic Radiographer 2391-11
Mining Engineer (excluding Petroleum) 2127-11
Obstetrician and Gynaecologist 2312-17
Occupational Therapist 2383-11
Ophthalmologist 2312-19
Optometrist2384-11
Paediatrician 2312-21
Pathologist 2312-23
Petroleum Engineer 2127-13
Physiotherapist 2385-11
Podiatrist 2388-11
Psychiatrist 2312-27
Quantity Surveyor 2122-11
Radiologist 2312-29
Registered Mental Health Nurse 2325-11
Registered Midwife 2324-11
Registered Nurse 2323-11
Retail Pharmacist 2382-15
Specialist Medical Practitioners (not elsewhere classified) 2312-79
Specialist Physician 2312-25
Speech Pathologist 2386-11
Sonographer 2391-17
Surgeon 2312-31
Surveyor 2123-13
Associate ProfessionalsASCO Code
Chef (excluding Commis Chef) 3322-11 (part)
Dental Technician3492-15
Trades PersonsASCO codes
Aircraft Maintenance Engineer (Avionics) 4114-15
Aircraft Maintenance Engineer (Mechanical) 4114-11
Automotive Electrician 4212-11
Baker 4512-11
Binder and Finisher4913-11
Boat Builder and Repairer 4981-13
Bricklayer 4414-11
Cabinetmaker 4922-11
Carpenter 4411-13
Carpenter and Joiner 4411-11
Cook 4513-11
Drainer 4431-15
Electrical Powerline Tradesperson 4313-11
Electrician (Special Class) 4311-13
Electronic Equipment Tradesperson 4315-11
Fibrous Plasterer 4412-11
Fitter 4112-11
Floor Finisher 4423-11
Furniture Finisher 4929-13
Furniture Upholsterer 4942-11
Gasfitter 4431-13
General Electrician 4311-11
General Plumber 4431-11
Hairdresser 4931-11
Joiner 4411-15
Landscape Gardener4623-13
Lift Mechanic 4311-15
Locksmith4115-15
Mechanical Services and Air-conditioning Plumber 4431-19
Metal Fabricator (Boilermaker) 4122-11
Metal Machinist (First Class) 4112-13
Motor Mechanic 4211-11
Optical Mechanic 4999-11
Painter and Decorator 4421-11
Panel Beater 4213-11
Pastry Cook 4512-13
Pressure Welder 4122-13
Refrigeration and Air-conditioning Mechanic 4312-11
Roof Plumber 4431-17
Roof Slater and Tiler 4413-11
Solid Plasterer 4415-11
Sheetmetal Worker (First Class) 4124-11
Stonemason 4416-13
Toolmaker 4113-11
Tree Surgeon4623-15
Vehicle Body Maker 4215-11
Vehicle Painter 4214-11
Wall and Floor Tiler 4416-11
Welder (First Class) 4122-15


* Important: If you nominate one of the above specialist computing occupations, you will only be awarded MODL points if your skills assessment from the relevant Australian assessing body – the Australian Computer Society (ACS) states you have met the criteria to be recognised in one of the above specialisations.

Skills assessments provided to successful applicants will state:
Note: If you have a skills assessment which only states the ASCO Code for 'Computer Professional nec 2231-79', you are not eligible to be awarded MODL points. A new assessment with the above information will be required if you wish to claim MODL points.
How often does the MODL change? The MODL is reviewed twice a year to take into consideration existing and emerging skills shortages. This does not mean the list is changed twice a year. Changes only occur if there has been a significant change in labour market trends.
As the MODL may change from time to time, you are advised to check the current MODL at the time you are lodging your visa application.
How are occupation points awarded on the points test? If your nominated occupation is on MODL either at the time your application is lodged or assessed, you will be eligible for 'occupation in demand/job offer' points on the General Skilled Migration points test. You will receive extra points if you have a job offer from a suitable Australian employer.
What is a 'suitable Australian employer'? A 'suitable Australian employer' is an employer that has employed at least 10 people on a full-time basis for the previous two (2) financial years.
If you intend to claim points for 'occupation in demand/job offer' you are required to submit documentary evidence that your proposed employer meets these requirements. This evidence should include:
The department will make any necessary checks to ensure that the information provided is correct.

Priority processing If your nominated occupation is on the MODL, your General Skilled Migration visa application will receive priority processing.
作者: ubuntuhk    时间: 22-11-2008 21:23
C/C++,在澳洲属于不吃香的职业类别,在考虑改到哪个好混吃喝的职业呢
作者: sasa6    时间: 22-11-2008 21:46
名人出现啦,投票没?嗬嗬
作者: ubuntuhk    时间: 22-11-2008 21:50
当然投啦,C/C++第二票就是按投的
作者: feierztt    时间: 23-11-2008 01:48
我老公做通信行业的软件测试,能评上MODL吗?做的工作也不能算得上是Network Security/Firewall/Internet Security
怎么才能评上MODL呢?希望大家帮帮出处主意,谢谢!
作者: zhaoce    时间: 23-11-2008 11:24
原帖由 feierztt 于 23-11-2008 01:48 发表
我老公做通信行业的软件测试,能评上MODL吗?做的工作也不能算得上是Network Security/Firewall/Internet Security
怎么才能评上MODL呢?希望大家帮帮出处主意,谢谢!

评不上,因为是否是MODL不是由申请人决定
而是评估机构的官员根据你所递交的材料,尤其是推荐信来决定
软件测试想要做到MODL不太可能,除非作假,但是一旦作假被查出来就彻底玩完了
其实不用MODL,快不了多少,我的进度比同时递材料的不是MODL的人还慢了
ACS都是60分职业,基本上都能过120分线
作者: sasa6    时间: 23-11-2008 12:17
原帖由 zhaoce 于 23-11-2008 11:24 发表

评不上,因为是否是MODL不是由申请人决定
而是评估机构的官员根据你所递交的材料,尤其是推荐信来决定
软件测试想要做到MODL不太可能,除非作假,但是一旦作假被查出来就彻底玩完了
其实不用MODL,快不了多少, ...


Priority processing
If your nominated occupation is on the MODL, your General Skilled Migration visa application will receive priority processing.
那么这句话一点用没有啊。。。
作者: zhaoce    时间: 23-11-2008 19:19
原帖由 sasa6 于 23-11-2008 12:17 发表


Priority processing
If your nominated occupation is on the MODL, your General Skilled Migration visa application will receive priority processing.
那么这句话一点用没有啊。。。

我也希望它有用啊
可事实上就是快不了多少
其实无论是不是MODL,只要case分到VO手上,3个月内就要求出结果
除非遇到什么VO休假啊,背景调查有问题啊之类的东东,那就不好说了
作者: 2k4k    时间: 24-11-2008 03:05
一直没明白带*和不带*的差别,有人可以赐教吗?
谢谢
作者: sasa6    时间: 24-11-2008 13:04
原帖由 2k4k 于 24-11-2008 03:05 发表
一直没明白带*和不带*的差别,有人可以赐教吗?
谢谢


同学, 移民局网上的英文说明很清楚, 还是要好好研究啊, 这次我帮你翻翻

* Important: If you nominate one of the above specialist computing occupations, you will only be awarded MODL points if your skills assessment from the relevant Australian assessing body – the Australian Computer Society (ACS) states you have met the criteria to be recognised in one of the above specialisations.

Skills assessments provided to successful applicants will state:

the ASCO Code for Computer Professional not elswhere classified (nec) with the specialisation stated in brackets - for example, 2231-79 (SAP) and the statement: 'Based on the provided certified documentation, it is my opinion that the applicant has 12 months experience in (name of specialisation, for example, SAP)'.

Note: If you have a skills assessment which only states the ASCO Code for 'Computer Professional nec 2231-79', you are not eligible to be awarded MODL points. A new assessment with the above information will be required if you wish to claim MODL points.

* 重要提示: 如果你被提名以上带*的专业计算机职业类别, 你需要得到澳洲相关评估机构ACS的职业评估材料上声明并认可你已经达到该职业的标准, 才能得到MODL的分数.

通过人的职业评估材料将列明:

计算机相关专业的ASCO Code [Computer Professional not elswhere classified (nec)] 并在后面括弧并写明专业名称, 如2231-79 (SAP), 而且写明
: 'Based on the provided certified documentation, it is my opinion that the applicant has 12 months experience in (name of specialisation, for example, SAP)'. (根据提供的证明材料, 现证明申请人有12个月相关专业的工作经验, 如SAP).


注意: 如果你的职业评估材料上只列明ASCO Code "Computer Professional nec 2231-79" 是不能得到MODL的分数的, 要想获得MODL分数你将需要进行一个新的评估, 评估上需列明以上信息.

[ 本帖最后由 sasa6 于 24-11-2008 13:38 编辑 ]
作者: 2k4k    时间: 24-11-2008 21:11
如果不带*,无需声明就可以拿到MODL的分数吗?
作者: richardwei    时间: 25-11-2008 12:33
如果年龄30一下,只要是本科毕业,是不是MODL分都够。但是年龄过了30,就必须MODL。
好像只有我一个是data warehousing的,呵呵,今年5/17刚刚新增加的MODL
作者: sasa6    时间: 25-11-2008 16:10
原帖由 2k4k 于 24-11-2008 21:11 发表
如果不带*,无需声明就可以拿到MODL的分数吗?


我理解MODL都要在2231-79写明专业的类别,但声明没有*的不一定要. 请参考以下没有*的LINUX的评估通过信.
[attach]38253[/attach]
作者: sasa6    时间: 25-11-2008 16:13
原帖由 richardwei 于 25-11-2008 12:33 发表
如果年龄30一下,只要是本科毕业,是不是MODL分都够。但是年龄过了30,就必须MODL。
好像只有我一个是data warehousing的,呵呵,今年5/17刚刚新增加的MODL


嗯,差不多,新增MODL应该比较稳定,祝你顺利!
作者: richardwei    时间: 26-11-2008 13:13
原帖由 sasa6 于 25/11/2008 16:13 发表


嗯,差不多,新增MODL应该比较稳定,祝你顺利!

谢谢,也祝你顺利,我现在是万事俱备,只欠雅思
作者: sasa6    时间: 8-12-2008 19:05
ding
作者: zhaoce    时间: 14-12-2008 01:09
.Net居然没有人选,这着实让人有些意外,呼呼
作者: immigrants    时间: 15-12-2008 18:16
我想問一下, 是不是所有的專業類別都可以用 2231-79 去申請, 不一定是 MODL?

例如有沒有 2231-79 (Systems Analysis), 2231-79 (Oracle e-business suite), 2231-79 (PowerBuilder), 2231-79 (Visual Basic) 等?
作者: zhaoce    时间: 18-12-2008 00:30
原帖由 immigrants 于 15-12-2008 18:16 发表
我想問一下, 是不是所有的專業類別都可以用 2231-79 去申請, 不一定是 MODL?

例如有沒有 2231-79 (Systems Analysis), 2231-79 (Oracle e-business suite), 2231-79 (PowerBuilder), 2231-79 (Visual Basic) 等?

没有,只有上述的才可以
其他的acs专业是非modl的
作者: immigrants    时间: 18-12-2008 03:11
原帖由 zhaoce 于 18-12-2008 00:30 发表

没有,只有上述的才可以
其他的acs专业是非modl的


我不是問 MODL, 我只是想 2231-79 (???), 因為我想申請南澳 475
作者: ubuntuhk    时间: 18-12-2008 04:00
标题: 回复 #20 immigrants 的帖子
完整的职业列表在这里:(包括所有ACS分类)

http://www.immi.gov.au/allforms/pdf/1121i.pdf
作者: immigrants    时间: 18-12-2008 12:27
原帖由 ubuntuhk 于 18-12-2008 04:00 发表
完整的职业列表在这里:(包括所有ACS分类)

http://www.immi.gov.au/allforms/pdf/1121i.pdf


這裡只會有 2231-79, 而沒有任何 specialising 的!
作者: sasa6    时间: 18-12-2008 12:34
借着新政,MODL火了
作者: vichyboy    时间: 18-12-2008 16:59
被大家这么一说我倒有点糊涂了,我这样的回信应该是MODL J2EE没错吧??
[attach]41571[/attach]
作者: gwq88    时间: 19-12-2008 01:10
没错!!!
作者: vichyboy    时间: 19-12-2008 01:22
谢谢楼上的ORACLE专家
作者: maqianyi    时间: 24-12-2008 17:02
原帖由 vichyboy 于 18-12-2008 16:59 发表
被大家这么一说我倒有点糊涂了,我这样的回信应该是MODL J2EE没错吧??
41571


很明白,你的是MODL .而且现在还是CSL 上面的.
恭喜你.和我一样,不过我是ORACLE
作者: simov    时间: 24-12-2008 19:48
我不太明白,今年7月份评估的linux现在是属于CSL里面吗?
新政里面只要是原来的ACS评估的MODL都属于CSL吧,我理解错没?
作者: maqianyi    时间: 24-12-2008 19:54
你的理解没有错.
所有在MODL里面的IT类别都是CSL类别.
不过其他大多数MODL就没有这么幸运了
作者: zhaoce    时间: 24-12-2008 20:34
标题: 搞.net的同仁混得这么差?
一个都没有?不是吧
作者: zhaoce    时间: 24-12-2008 20:36
原帖由 immigrants 于 18-12-2008 03:11 发表


我不是問 MODL, 我只是想 2231-79 (???), 因為我想申請南澳 475

你到底再说什么?
2231-79(???)就全都是modl
要么是2231-79,没有(???)也是有的,这个不是modl
总之没有2231-79(???)就不是modl
作者: immigrants    时间: 27-12-2008 03:57
但 ICT 有很多類別, 舉個例, 2231-79 (PowerBuilder), 這個 specialising 不是 MODL 的
作者: ritz    时间: 24-1-2009 04:05
今天(准确说是昨天了)收到ACS RL, 终于可以肯定的投J2EE这一项了...
作者: 戴鹏    时间: 24-1-2009 15:46
原帖由 zhaoce 于 24-12-2008 20:34 发表
一个都没有?不是吧

不是很清楚C#和.NET Techonology有什么大的区别吗?C#应用.net技术,.net技术和C#应该是息息相关的,不知道为什么要分开来
作者: 新格咪咪    时间: 1-6-2009 17:54
我是软件测试人员 测试了4年的 office  软件 这个软件是用java写的 我可以评上 2231-79(java)么
作者: 北极光    时间: 3-6-2009 05:38
原帖由 zhaoce 于 24-12-2008 19:34 发表
一个都没有?不是吧

没有叫吃香,不叫混得差。
作者: xiaocoke    时间: 4-6-2009 17:36
原帖由 戴鹏 于 24-1-2009 14:46 发表

不是很清楚C#和.NET Techonology有什么大的区别吗?C#应用.net技术,.net技术和C#应该是息息相关的,不知道为什么要分开来

嗯,一样的疑问。
我是.Net.
作者: MillerYang    时间: 4-6-2009 18:27
标题: 回复 #37 xiaocoke 的帖子
C#可用于 .net
.net不局限于C#
不知道理解的对不对。。。
作者: kkkei    时间: 12-7-2009 01:06
原帖由 戴鹏 于 24-1-2009 14:46 发表

不是很清楚C#和.NET Techonology有什么大的区别吗?C#应用.net技术,.net技术和C#应该是息息相关的,不知道为什么要分开来


基本上用.net的都评到C#了。。。相对好评一些,我就是这样
作者: Yok    时间: 12-7-2009 02:06
干了近5年.net, 然后给现在的公司调了部门,干javascript / python 去了
人越老就越懒,基本上不想碰静态语言了
作者: tototo    时间: 23-7-2009 14:07
原帖由 richardwei 于 25-11-2008 11:33 发表
如果年龄30一下,只要是本科毕业,是不是MODL分都够。但是年龄过了30,就必须MODL。
好像只有我一个是data warehousing的,呵呵,今年5/17刚刚新增加的MODL


我觉得年龄过了30也不一定非要MODL,完全可以评到120分的。
作者: roninyzy    时间: 23-7-2009 17:18
标题: 弱弱的问一下
我想请教一下,我是学java的,这5,6年都在用java开发,大多数都是网站方面,也是就j2ee(jsp, servlet, ejb, etc)相关的,如果申请的话是申请java呢,还是j2ee,哪一个比较容易批准,或者说哪一个比较保险。
作者: Veoria    时间: 23-7-2009 19:38
这个问题,我也想问,哪个大虾指教一下啊
作者: binbenban    时间: 23-7-2009 19:48
标题: 我的是这样: Java/J2EE/SAP
这就是中途变节的结果
作者: roninyzy    时间: 24-7-2009 19:39
楼上的是什么意思呢?是申请java失败了,再申请J2EE么?
还是说评估哪里让你改动呢?
谢谢
作者: ericbado    时间: 28-7-2009 09:58
没想到C的最多啊
作者: ericbado    时间: 28-7-2009 10:01
原帖由 roninyzy 于 23-7-2009 16:18 发表
我想请教一下,我是学java的,这5,6年都在用java开发,大多数都是网站方面,也是就j2ee(jsp, servlet, ejb, etc)相关的,如果申请的话是申请java呢,还是j2ee,哪一个比较容易批准,或者说哪一个比较保险。


我申请的时候填的是Java/J2EE,最后信上写的是J2EE and Java Specialist
作者: roninyzy    时间: 29-7-2009 17:11
谢谢楼上的回答,看你好像是最近过的acs,不过很多人说不能同时申请两个类别的,
有点糊涂了,能不能告知一二呢?
作者: ericbado    时间: 30-7-2009 13:02
Occupation: Computing Professional - specialising in Java/J2EE
中介是这样帮我填的,我当初也疑惑,但是他说他帮之前的人也这么填,还给我看了。
如果你为了保险,要不还是填一个吧。
其实J2EE肯定包含Java的,但Java并不一定是J2EE
作者: roninyzy    时间: 30-7-2009 13:54
谢谢楼上的回答,我在考虑考虑。
作者: finalfantasy    时间: 16-8-2009 02:11
我RPL

[ 本帖最后由 finalfantasy 于 10-11-2010 19:44 编辑 ]
作者: francis_zhang    时间: 16-8-2009 11:41
CSL们抓紧时间递
作者: kevinsun    时间: 25-8-2009 18:07
鸭子鸭子




欢迎光临 FreeOZ论坛 (https://www.freeoz.org/ibbs/) Powered by Discuz! X3.2