|
|
|
马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。
您需要 登录 才可以下载或查看，没有帐号？FreeOZ用户注册
x
虽然澳洲电子工程师的职位的确很少,但是我还是希望能从事这一行业,以前主要做音频的，所以嵌入式的东西懂得也不是很多
简历投出后一直没反应,希望得到各位高人指点
Name
Contact details
Visa: 175 (permanent residential visa)
Job intention:
Electronics engineering field
QUALIFICATIONS:
2003.10- 2007.07 XXXXXX University
Bachelor Degree of Electronics Engineering
With Engineers Australia skill assessment (scanned copy in the attachment)
LANGUAGE:
English: Good user
Japanese: Intermediate
Mandarin: mother tongue
PROFESSIONAL SKILLS:
• Have a clear concept in R&D work and new products’ developing process
• Experienced in analog circuit design, such as OPAMPs, transistors, power supply
• Experienced in designing PCB layout and have a good command of PCB layout rules, both manufacturing and EMC focusing
• Experienced in improving audio performance, such as S/N, THD, separation
• Experienced in improving EMC performance, including radiation, anti-interference as well as ESD(electro-static discharge)
• Knowledge in embedded system, C programming and using 51 series microcontroller
• Fluent in using electronics design CAD software and simulation tools such as: CR5000 Cadence Allegro and Pspice
• Experienced in using lab equipments, such as multi-meter, audio analyzer, RF generator, Spectrum scanner, oscilloscope
• Excellent soldering skills in both through-hole and surface-mounting components (small to 0402size)
• Knowledge in manufacturing process of electronic products
• Knowledge in product lifecycle management, project management and DFM (design for manufacturing)
• Good ability in ABX sound quality evaluation
• Fluent in operating computer and Microsoft Office software
SOFT SKILLS:
• Enthusiast in electronics, as well as an audiophile
• A can do attitude and willingness to learn new knowledge
• Team player, creativity, and good trouble shooting, solving skills
• Belief in offering customers with high quality products while maximizing profit for company
Professional EXPERIENCE
Mar. 2010 – Jan.2012 XXXXXXXXXXXXXXXXXXXXX R&D Centre
Electrical Engineer
Brief company introduction
Key responsibility:
• Participated in organizing new R&D centre and lab, planned and ordered facilities based on project demand, given budget, and products’ quality
• Took part in project management to evaluate and control project budget, product cost and schedule
• Designed circuits and PCBs of hearing aids and improve its electrical performance
• Worked with vendors to source components, test quality, and do cost comparisons in order to ensure quality sustainable supply of components
• Worked with quality engineer to optimize product quality
• Provided technical support to other departments in order to ensure smooth transition during product development
• Benchmarked products of competitors and summarize Pros and Cons
• Maintained CAD software Cadence Allegro, including license and library
• Constructed and maintained R&D internal information sharing platform “wiki”
• Provided product maintenance support based on ECR/ECOs(Engineering change
request/orders) related to amplifier/PCB behavior/process improvement
• Supported hearing instruments’ homologations
• Participated in Idea workshop and gave innovative ideas for future hearing aid products
Jul. 2007 – Feb. 2010 XXXXXXXXXXXXXXXXXXXXXX R&D Centre
Electronics Engineer
Brief company introduction
Key responsibility:
• Did circuits and PCB layout design of car audio products and improved its electrical performances
• Worked with quality engineer and manufacturing engineer to optimize products’ quality as well as manufacturing reliability
• Did various tests in audio, power supply, EMC and improved the performance
• Provided technical support to other departments in order to ensure smooth transition during product development
• Benchmarked products of competitors and summarize Pros and Cons
PROJECT EXPERIENCE
Mar. 2010 – XXXXXXXXXXXXXXXXXXXXXXXX project
Brief product introduction
Responsibility & contribution in project:
• Did feasibility, risk, and usability analysis based on the draft idea provided by product manage; made proposal to finalize function and target specification for this new hearing aid
• Evaluated project cost & product cost of electrical part, worked with project manager and other stakeholders to set up project schedule
• Worked with Idea design company to settle the final appearance and internal structure, proposed using “L” shape PCB and got 50% saving on PCB
• Designed circuit and optimized components value based on simulation results
• Designed PCB layout with regarding to hearing aids EMC requirements and manufacturing reliability
• Chose components which can meet target specification and desired cost
• Generated BOM and worked with manufacturing engineer to finish prototype
• Did electrical-acoustic test and worked with electro-acoustic engineer to improve it
• Solved feedback issue of both acoustic and circuitry
• Research EMC standard for pocket hearing aid and set up EMC lab for testing; improve product’s EMC performance
Sep. 2010 – Apr. 2011 XXXXXXXXXXXXXXXXXXXXXXXXX forefront Project
Brief product introduction
Responsibility & contribution in project:
• Advise different ways to achieve it and evaluate their cost
• Evaluate whether this product strategy is profitable for company
Jun. 2010 – Sep. 2010 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Project
Brief product introduction
Responsibility & contribution in project:
• Discovered the original components too expensive; found alternative parts and verified the performance remained the same when using them. Achieved in making electrical parts 66.7% cheaper
• Raised ECR&ECO to change the product BOM and supported production when manufacturing
Dec. 2008 – Feb. 2010 XXXXXXXXXXXXXXXXXXX project, sold in Australia
Brief product introduction
Responsibility & contribution in project:
• Designed its circuit and PCB layout and improved its performance
• Cost down components' prices
• Solved headunit resetting problem (the headunit reset when a communication mobile phone was very close to it)
• Summarized tuner mis-stop problem, traced the interference source and found solution, documented this in company design guideline
• Solved click noise caused by rotating volume controller
• Improved aux input separation performance by optimizing layout
• Prepared BOM for mass production
Nov. 2007 – Nov. 2008 XXXXXXXXXXXXXXXXXXXXXXXX project, sold in Australia
Brief product introduction
Responsibility & contribution in project:
• Did circuit and PCB layout design
• Did tests of audio, power supply and EMC, and improved these performances
• Solved tuner FM and AM beat noise issue
• Reduced noise caused by mobile phone to pass “work with Iphone” by Apple INC.;
• Improved PCB layout design with manufacturer engineer based on soldering reliability and productive
• Did sound quality evaluation comparing with competitor’s products
Jul. 2007 – XXXXXXXXXXXXXXXXXXXXX project, sold in Australia
Brief product introduction
Responsibility & contribution in project:
• Did product tests in different categories, such as audio, tuner and power supply
Special reward:
XXXXX 3i reward:
for achieving over 15,000 Euros saving by the proposal of sharing Cadence Allegro license with colleagues in Germany (good usage of different time zone)
References:
Letter of recommendation is the attachment.
cover letter
Dear Sir/Madam,
I’m writing this letter in regarding to the XXXXXXXXXXXXX position listed on www.seek.com.au on XXXXXXXXXXX.
Having worked in global R&D centers as electronic engineer for nearly 5-year, I build up strong communication skills with people from different cultures, as well as solid professional knowledge and project managing skills.
I participated in 6 projects (some of them were well sold in Australia, e.g.XXXXXX) and took charge of various circuit design including power supplies, controllers, and amplifiers, I achieved them either by discrete components or ICs with low cost and good performance. Fluency in circuitry theory calculation and using Pspice made my work more efficient. During projects’ development, I played a key role in tracking and solving problems, such as improving circuits’ and EMC performance.
Not only did I have extensive experiences in accomplishing various circuitry, but also I performed very well in project management. At XXX, I discovered cost saving margin for one selling product and made the cost of electrical parts 66.7% down. I also optimized PCB panel design in one project and save 50% cost. I am always ahead of deadline as I arrange my time appropriately.
I am quite confident that I can fulfill this vacancy and create more profit for your company.
Thank you very much for considering my application. I can make myself available for an interview at your convenience, my contact details are provided in the resume.
[ 本帖最后由 afajufeng 于 11-6-2012 20:06 编辑 ] |
|
发表于 11-6-2012 21:00:08
收藏
赞
踩
