Electronics Technician (Melbourne)

soman

Position Title:

  
Business Unit: P D & E

  
Location: Braeside

  
Reporting to: Senior Electronics Engineer - Controls

  
Position purpose: To test and analyse control products as part of the process that ensures they are suitable for initial release and to improve the product once it is in production. Analysis of control field returns to determine the failure mode (ie what component has failed/method by which failure occurs) as required (ie not every control returned but those where there are unusual/many failures)
Involved in service calls to analyse and determine why controls are failing (eg instrumenting houses for data collection) - inc conditions required for failures to occur
Make and assemble PCBs, prototypes, test boards
Testing in accordance with test requests for the development of new controls, investigating problems to define accurately the conditions under which they occur. Also investigate to find the cause of the failure.
Testing proposed s/ware and h/ware design changes to ensure they are suitable for production
Perform tests to evaluate alternative design concepts developed by Brivis

  
Essential Competencies: Minimum of 5 years of electronic technician work. Advanced Certificate in Electronic Engineering (minimum). Ability (and understanding) to do EMC Conducted Emissions testing. Assist in the assembly of specialised production equipment as required (eg pcbs for EOL testers).

  
Contact Details  
Name: Steve Bensted

  
Address: 61 Malcolm Road, Braeside VIC 3195
E mail: steve.bensted@carrier.utc.com
Tel No(Office): (03) 9264 9457
Mobile No: 0418 172 293
Closing Date: 24 August 2007

soman

想加一句，各位寄简历或面试时不要说是网上看到的信息，只说听朋友说就好了。我是从内部网中找来的，不知道这些职位有没有公开发布。。。
也许也没关系，我不清楚会不会有影响。。。

Good Luck!

[ 本帖最后由 soman 于 18-8-2007 00:54 编辑 ]