|
Pick the Right Pack The Backpack Buying Guide
Capacity Comes FirstSelecting the appropriate backpack capacity is a balancing act. You need to carry all the essentials into the backcountry, but don't go overboard. an oversized backpack with lots of non-essential stuff just means extra weight and slower going.
When buying a backpack, you need to ask yourself two questions before anything else: how long is your typical backpacking trip, and which season do you usually prefer? Camping trip lengths and seasons may ultimately vary, but you generally know whether you're more of a summer weekend backpacker or a hardcore alpinist who likes to venture into the Rocky Mountains in all four seasons.
You want just the right size backpack to hold whatever you need. When in doubt, it's okay to go up a size in terms of capacity, though. You'll only be adding a little weight for quite a bit more room. Here are some general backpack capacity guidelines:
Best Backpack Capacity by Activity | Duration of Trip | Season | Best Pack Volume | Cubic Inches | Liters | 5 Nights or More | Summer | 4000-5000 | 65-80 | | Spring/Fall | Over 5000 | 80-90 | | Winter | Over 5000 | 80-90 | 3-5 Nights | Summer | 3000-4000 | 50-65 | | Spring/Fall | 4000-5000 | 65-80 | | Winter | Over 5000 | 80-90 | 1-2 Nights | Summer | 2500-3000 | 40-50 | | Spring/Fall | 3000-3500 | 50-55 | | Winter | 4000-5000 | 65-80 | Day Hike Only | Summer | 1500-2000 | 25-35 | | Spring/Fall | 2000-2500 | 35-40 | | Winter | 2500-3500 | 40-55 | Note: Keep in mind that cold-weather trips require additional clothing, thicker sleeping bags, etc., which require more room in your pack. Also, keep in mind that some hikers eat more food or wear larger clothing, so will need more capacity in their pack.
If you take short day hikes in warmer weather, you may prefer a simple daypack orfanny pack(lumbar pack) to carry essentials like food and water. Daypacks are essentially small backpacks, while fanny packs are just the right size for a few essentials and allow more ventilation than other packs.
Back To Top
Internal vs. External FramesA backpack frame transfers the weight of the load to the hips and maintains a pack's shape. Almost all packs today are internal frame backpacks, with traditional external frame backpacks becoming less popular. Internal-frame packs hug the body more than external-frame packs to offer better balance and easier movement, a feature you'll appreciate during off-trail activities like bushwhacking, mountaineering and backcountry skiing. On the other hand, external frame backpacks may offer more ventilation between your back and the pack, which can come in handy in really hot weather. They also are employed in very high-capacity backpack models.
Internal Frame | External Frame | Back To Top
Sizing TipsWhile you can heft just about any pack onto your shoulders, sizing a backpack correctly will make a tremendous difference once you've traveled for miles with the pack fully loaded.
For the most comfort and ease of movement, you need to transfer most of a backpack's weight to where your body best bears a heavy load: your hips. In fact, about 80% of the backpack weight should rest on your hips. To achieve this, you just need to size your backpack correctly and make the right adjustments.
You know those thingies you put your feet into to determine your shoe size? Well, they don't make those for finding your best backpack size. You've got to do a little measuring for yourself.
Measure Your Torso & HipsUsing a tailor's tape or other flexible tape, record these two measurements before shopping for a pack. If you don't have a flexible tape, you can use a piece of yarn or cord instead, then lay the marked length of yarn on a tape measure to determine the length.
Note: It really helps to have someone assist you with these measures.
- Torso: This is the length from the prominent bump at the base of your neck - the C7 vertebra - to the center point on your spine between the tops of your hip bones. Find the top of your hip bones by running your hands down your sides until you first meet your hips at the iliac crest, then envision an imaginary line between your thumbs at the top of your hips along your back.
- Hips/ Hip Belt: This measure obtains the girth of your hips. Measure around your body, one inch lower than the iliac crest (the top of the hip bones). This measure is less important than torso length, since most hip belts adjust to accommodate a wide range of users.
Approximate Sizing for Packs (Varies by Brand and Style): Extra Small:Fits torsos up to 15"
Small: Fits torsos 15" to 17"
Medium/Regular: Fits torsos 17" to 20"
Large/Tall: Fits torsos 20" and up
Always use the specific size guidelines listed for each backpack to determine your best pack size, not simply the general guide shown above. Also, realize that Sierra Trading Post does not offer torso measures or other fit guidelines fordaypacks, only for backpacks. Because daypacks are so small and carry so little, manufacturers treat them as "one size fits all." Some smaller "backpacks" (less than 2000 cu.in.) are essentially daypacks, and will therefore also not show a torso size range on SierraTradingPost.com.
Back To Top
Fitting a Pack: Personal Adjustments Even if you determine the perfect backpack size, every time you put your backpack on you'll need to make fit adjustments before you hit the trail. Always be sure some weight is in the pack before making any adjustments; for the initial fit at home, put 15-20 lbs. of weight in the pack and try to fill most of the volume. Sleeping bags and clothes should do the trick. Here are step-by-step instructions for a comfortable fit:
- Loosen the main straps: shoulder strap load adjusters, shoulder straps, hip belt, and hip belt load adjusters.
- Put the pack on and fasten the hip belt.
- Tighten the shoulder straps.
- Tighten the load adjuster straps.
- Shrug the load up high, then tighten the hip belt very snugly while still shrugging.
- Go back and readjust the shoulder straps as needed.
- Last, fasten the sternum strap to keep your shoulder straps pulled in.
Note: The sternum strap is not designed to bear weight, but merely to keep the shoulder straps in place. If this strap constricts your breathing at all, it's too tight.
Adjusting on the MoveShoulder straps too tight on the trail? To readjust your load after you get going to take some weight off your shoulders, simply follow these four steps:
- Loosen the load adjustment straps.
- Shrug up the backpack.
- Tighten the hip belt (while the load is still being shrugged).
- Relax from the shrug, then retighten the load adjusters if necessary.
Back To Top
Women-Specific PacksMost manufacturers now offer women-specific backpacks to better accommodate a woman's frame. Some features of women-specific backpacks that differentiate them from unisex packs include:
- Narrower shoulder-strap spacing
- Reduced pack width and profile
- Hip belt reshaping, with narrower top and wider bottom to fit the "bell" shape of a woman's hips
- Shorter torso length
Back To Top
Backpack Features Backpacks run the range from simple rucksacks with a single large pouch to high-tech, feature-laden models that Q might design for 007 (minus the smokescreen and poison-dart features). Every backpack's main features will be listed in the pack's description. Many will come in very handy, so be sure to select a pack with the best features for your activity.
Loading OptionsThere are two main categories of backpacks in terms of main-compartment loading: top-loading and front-loading.Top-loading backpacks, which usually have a drawstring on top and a protective flap over the opening, are generally lighter and designed to stuff without spilling.Front-loading backpacks, which have a zip running down the front of the pack, allow easier gear access. Some packs combine to offer both top and front loading options.
Frame/ SupportsAn internal pack frame may be comprised of stays and/ or a framesheet. Stays are vertical rods or bars that act to maintain the pack's shape and keep the weight on your hips. A framesheet appears inside the back of some packs and is usually made of high-density polyethylene (HDPE) or another composite. The framesheet is intended to prevent hard objects in your pack from poking you in the back.
Hydration CompatibilityMost backpacks coming out on the market today are "hydration compatible." For true hydration compatibility, a pack requires a few simple extras:
- A compartment against your back (but inside the pack) that holds a water reservoir.
- A port on one or both sides at the top of the pack to route a drinking tube from the reservoir to your mouth.
- In some models, clips on the shoulder straps to keep the hose in place near your mouth.
Note: Most backpacks are not sold with a full hydration system (i.e., reservoir, tube and mouthpiece), which needs to be purchased separately.
Attachment Points Attachment points refer to areas on a pack where you can tie, hang or clip gear. Parachute cord or carabiners can come in handy here. Examples include:
- Daisy Chain: A series of small vertical fabric loops running down the front of a pack.
- Ice Axe Loops: Large loops on the bottom of the pack from which you can suspend an ice axe or similar tool.
- Trekking Pole Lash Points: Specifically designed to accommodate collapsedtrekking poles.
Rain CoverRain Cover
An integrated rain cover is an invaluable backpack feature for wet climates. The cover stows in a pocket on the pack for easy deployment when rain starts falling. These covers also are good in heavy brush to prevent your pack from snagging on the understory.
Ventilated BackSome external-frame backpacks use a taut mesh fabric to create a pocket of air between your back and the pack, while many internal-frame packs use channels in the back padding to allow air flow. Also, any weight-bearing straps and padding that touch your
body should breathe well and allow for ventilation, with
a mesh construction.
Detachable DaypackDetachable Daypack
In some backpacks, the lid or front compartment will detach to become a separate daypack or fanny pack. This is a great feature for longer backpacking excursions where you'll want to do a little light exploring near each campsite.
Compression StrapsCompression straps allow you to tighten down the load for a smaller trail volume once the pack has been fully loaded. They are usually located on the sides of the pack.
Water-Bottle PocketsA pair of mesh pockets on either side of the bottom of a backpack, located on the outside for easy access and the prevention of a wet inner pack.
Ski Carry SystemSome specialized packs have straps designed to hold your skis during a winter ascent. Usually these straps orient the skis diagonally across your back.
Back To Top
Backpacking Tips - Pack light! Every ounce matters when you're covering lots of ground and elevation.
- Pack the heavy stuff against your back in the middle of the pack.
- Prepare for the worst possible weather, even if it's not in the forecast.
- Tell someone where you're going and when you'll be back.
- Bring plenty of water or better yet, a packable water filtration system that removes parasites like Giardia.
- Remember extra batteries for your headlamp, flashlight and GPS.
- Have a good map and compass, and know how to use them.
Back To Top
Leave No Trace Sierra Trading Post is a proud sponsor of the Leave No Trace Center for Outdoor Ethics. Please follow the seven principles outlined below to ensure future enjoyment of your favorite hiking trails.
- Plan ahead and prepare
- Travel and camp on durable surfaces (Stay on the trail!)
- Dispose of waste properly
- Leave what you find
- Minimize campfire impacts
- Respect wildlife
- Be considerate of other visitors
|
评分
-
查看全部评分
|